VariBest vinyl skirting features a heavy-duty, beaded panel that combines a beautiful appearance and superior performance. A specially designed locking system on both the top and bottom rails provides maximum protection from blowout. The unique self-adjusting design of the panels prevents buckling during extreme weather changes.
VariBest skirting is available in solid or vented panels. The unique channel vent design cleverly conceals the air holes, so all you see is the simulated natural wood exterior. The bottom rail design features precut slots for ground spikes or cement screws, allowing for easy installation in concrete or directly on the ground.
VariBest won’t dent, conduct electricity, or attract insects. Variform skirting comes with a Lifetime Limited Warranty against peeling, blistering, rot, rust, and corrosion. VariBest beaded vinyl skirting can be cleaned easily with a garden hose. Stubborn dirt can be removed with mild dishwashing detergent and water
Features of VariBest
1. New top-rail design resists warping and blowout. Pre-notched front top rails allow for expansion overlap and help reduce installation time.
2. Removable-panel design keeps garden tools, lawn furniture, and children’s toys out of sight – but not out of reach.
3. New panel profile adds strength and provides extra security against wind loads. Extra-wide, 13-inch panels means fewer panels to cut – which saves even more installation time.
4. Unique design lets panels self-adjust to ground-level fluctuations due to changes in weather conditions. These installation guides also keep panels from snagging on rail fasteners during frost heave, thereby preventing buckling.
5. Special interlocking panels keep the panels secure and the locks hidden so they don’t detract from the appearance of the home.
6. Ventilated panels are required to help eliminate moisture buildup and allow for proper air circulation. (Check the home’s specifications for proper ventilation requirements.)
7. “F” shaped bottom rail design (instead of a narrow “U” shaped channel) provides a stable foundation and prevents the channel from buckling.
8. The bottom rail design, with its precut slots for ground spikes or cement screws, allows for ease of installation on concrete or directly on the ground.
9. Variform color choices let you bring out the beauty of any home. Available in 6 vivid colors: Pearl, Clay, Tan, Beige, Gray, and White.
VariBest Installation Instructions
1. Use a plumb bob to find the points on the ground exactly under the corners of the home. Connect the points with a chalk line. Align the ground channel over chalk line. Then use ground spikes to fasten the skirting’s ground channel along the chalk lines.
2. To go around corners, just notch, bend the ground channels, and attach them to the ground. Don’t cut them.
3. Working in a straight line along the bottom of the home, screw or nail the top back rail onto the home all around.
4. Cut the panels to the height you need, angling them on bottom to correspond to the ground angle. With your snap-lock tool, punch tabs in the center of the face along both top and bottom edges of the cut panel sections. Be sure to punch so that the tabs extend outward to catch on the rail. Interlock several panels at a time, then set them into the ground channel. At corners, just bend panels; they’re flexible. Don’t cut them.
5. Snap the top front rail into the top back rail and you’re finished.
VariBest Installation Instructions
1. Use a plumb bob to find the points on the ground exactly under the corners of the home. Connect the points with a chalk line. Align the ground channel over chalk line. Then use ground spikes to fasten the skirting’s ground channel along the chalk lines.
2. To go around corners, just notch, bend the ground channels, and attach them to the ground. Don’t cut them.
3. Working in a straight line along the bottom of the home, screw or nail the top back rail onto the home all around.
4. Cut the panels to the height you need, angling them on bottom to correspond to the ground angle. With your snap-lock tool, punch tabs in the center of the face along both top and bottom edges of the cut panel sections. Be sure to punch so that the tabs extend outward to catch on the rail. Interlock several panels at a time, then set them into the ground channel. At corners, just bend panels; they’re flexible. Don’t cut them.
5. Snap the top front rail into the top back rail and you’re finished.
VariBest Sizing Chart
Colors
May not be exactly as shown
White
Pearl
Clay
Gray
Beige
Tan
