Products - Rapid Wall Skirting

Rapid Wall Insulated Skirting

Rapid Wall Perimeter Skirting System provides an excellent alternative to traditional skirting systems. Available in White, Grey or Tan, this siding has the look of a true concrete foundation for your manufactured or modular home. These panels provide an insulation factor of R8. They are shipped in 4' x 12' sections, so there are fewer visible seams. Foundation vents are available and are easy to install. No bracing is required, saving time and money.

:: Please contact us directly for warranty info


Features
  • Vinyl with Clean Concrete Like Foundation Appearance
  • 4' Wide Panels Means Fast Installation, No Special Tools Required
  • Installs Like Traditional Vinyl Skirting
  • EPS Foam Backing, R-8 Insulating Value
  • Foam Backing Stiffens the Panel Preventing Wind Blowout

Rapid Wall Sizing Chart
Single Section Homes
Typical Home Size 12x50 12x56 12x60 12x65 12x70 14x52 14x56 14x60 14x64 14x70 14x80 16x70 16x80
Linear Feet Less Hitch 116 128 136 146 156 124 132 140 148 160 180 164 184
# Panels up to 24" Height 5 6 6 7 7 6 6 6 7 7 8 7 8
# Panels 25" to 36" Height 8 8 9 10 10 8 9 9 10 10 12 11 12
# Panels 37" to 48" Height 10 11 12 13 13 11 11 12 13 14 15 14 16
# Top and Bottom Rails 10 11 12 13 13 11 11 12 13 14 15 14 16
# Hardware Kits 1 1 1 1 1 1 1 1 1 1 1 1 1

Multi-Section Homes
Typical Home Size 24x44 24x48 24x52 24x60 24x70 28x44 28x48 28x52 28x60 28x70 28x80 32x70 32x80
Linear Feet Less Hitch 128 136 144 160 180 136 144 152 168 188 208 196 216
# Panels up to 24" Height 6 6 6 7 8 6 6 7 7 8 9 9 9
# Panels 25" to 36" Height 8 9 9 10 12 9 9 10 11 12 13 13 14
# Panels 37" to 48" Height 11 12 12 14 15 12 12 13 14 16 18 17 18
# Top and Bottom Rails 11 12 12 14 15 12 12 13 14 16 18 17 18
# Hardware Kits 1 1 1 1 1 1 1 1 1 1 2 2 2


Panel Calculation: Panels are 4'W x 12'H - 1. Measure the perimeter of the home and measure the height from the ground to the bottom of the home. Example: The perimeter measures 160' and the height off the ground is 36". Divide 160' by 4' = 40'. For a 36" height you will get 4 cuts out of each panel. Divide 40' by 4' = 10 panels needed.

Rail & Hardware Calculation: The top front, top back and bottom rails are 12' length. Divide the perimeter of the home by 12'. Example: The perimeter measures 160'. Divide 160' by 12' = 14 top and bottom rails. Each hardware kit will install up to 16 top and bottom rails.

Note: Don't forget to measure around decks and porches.


Colours - may not be exactly as shown

White
Gray
Almond

Click Here to Order Rapid Wall Insulated Skirting Online